/
2018-08-13 Colorado State University - CyVerse Genomics Data Carpentry and Tools and Services
2018-08-13 Colorado State University - CyVerse Genomics Data Carpentry and Tools and Services
Organizers: | |
---|---|
Local Point of Contact: | Zaid Abdo |
Trainers: | Jason Williams, TBA |
Helpers | Steven Lakin, Tobin Magle, Bridget Eklund |
Location | Scott Bioengineering Building Room 101 |
Parking | Lory Student Center (non-permit holders) or adjacent to building for permit holders |
Workshop Dates/Times | Data Carpentry: 9:30AM - 5:00PM August 13-14 CyVerse Tools: 9:30AM - 5:00PM August 15 |
Required Workshop Prep
1. CyVerse Account
- If you haven't done so, please get your free account at https://user.cyverse.org/
- Please register with an institutional email account as only this will give you access to the CyVerse cloud service Atmosphere (see next bullet). Please avoid gmail, yahoo, hotmail and the like for your CyVerse registration as you would not be able to register for Atmosphere with those.
2. Atmosphere Access
- Once you have your account, go to https://user.cyverse.org/services/mine. In the My Services tab, you should see Atmosphere. If not, go to Available Services and click the Request Access link for Atmosphere. Indicate that you are attending a workshop when you are asked for justification. (This will only be granted if you registered for CyVerse using an institutional account; see above.)
3. Computer requirements
- You should bring you own Wi-Fi enabled laptop and charger (A limited number of computers will be available on site). It is helpful to have administrative requirements if software installations are needed. Each workshop has a minimal set of requirements (bullets below), but in general, most laptops that can run the latest version of Firefox or Safari (recommended browsers) will have no problem connecting.
- Data Carpentry Installation Recommendations: See bottom of this page: https://jasonjwilliamsny.github.io/2018-05-16-uno/
- Tip: At a bare minimum - PC users will want to install PuTTY. Most other software needs are optional as we will be working on cloud instances.
- CyVerse Tools and Services Installation Recommendations: https://cyverse-cyverse-tools-and-services-workshop.readthedocs-hosted.com/en/latest/#pre-workshop-setup
- Tip: At a bare minimum - Mac/PC users should download Cyberduck
- Data Carpentry Installation Recommendations: See bottom of this page: https://jasonjwilliamsny.github.io/2018-05-16-uno/
Workshop Links and Schedule
Detail agendas available at the link below
Workshop | Date/Time | Link (to detailed agendas) |
---|---|---|
Data Carpentry | August 13-14, 9:30 AM - 5:00 PM Daily | https://jasonjwilliamsny.github.io/2018-08-13-csu/ |
CyVerse Tools | August 15, 9:30 AM - 5:00 PM | https://cyverse-cyverse-tools-and-services-workshop.readthedocs-hosted.com/en/latest/ |
Breaks and Meals
- Coffee and snacks will be provided
- Lunch will be from approximately noon to 1PM each day, (provided)
Cancellations, Questions
Please email Jason Williams and/or workshops@cyverse.org